Thermal conductive silicone grease DTT180
Product characteristics and applications:
DTT180 is a kind of silicone material with high thermal conductivity and insulation, which can hardly be cured. It has low oil separation, high and low temperature resistance, water resistance, ozone resistance and climate aging resistance. It has good thermal conductivity and electrical insulation. It meets the ROHS standard and relevant environmental protection requirements, and has stable chemical and physical properties.
DTT180 is mainly used for lighting components such as thermal interface materials of LED lamps, thermal interface materials of power supply modules, power components, thermal interface materials of electronic and electrical equipment, etc.
Main technical parameters:
項目 | 檢測標準 | 檢測結果 |
型號 | / | DTT180 |
外觀 | 目測 | 灰色膏狀物 |
導熱系數W/m-k | ASTM5470 | 1.8 |
密度（g/ml） | GB/T4471-2011 | 2.4±0.2 |
錐入度（1/10mm） | 25oC | 350±10 |
揮發份（200 oC/24h） | GB/T2502-1993 | 0.5% |
油離度（200 oC/24h） | GB/T2502-1993 | 0.3% |
體積電阻率/Ω.cm | GB/T1692-2008 | >1.0*1014 |
工作溫度范圍 | / | -40~200 oC |
介電常數（50Hz） | GB/T1693-2007 | 3.0 |
相關認證 | / | ROHS |
存儲期 | 5℃～25℃的陰涼干燥處儲存，自生產日期起，儲存期為12個月 | |
Note: All the above performance data are obtained at 25, 2 C and 50, 5% relative humidity.
Operation process:
1) Clean the surface to be coated and remove oil and impurities. Then the thermal conductive silicone grease is uniformly coated on the surface to be coated.
2) First, clean the radiator surface with high purity solvents such as high purity isoamyl alcohol or acetone and flannel-free cloth (such as cloth for lens cleaning).
3) The silicone grease is directly coated on the heat dissipation contact surface with a scraper and a brush, and the silicone grease is properly lightly pressed so that the silicone grease can better fill the interface. Achieving ideal thermal conductivity
4) Screen printing is available.
Storage, transportation and precautions:
1) The use of thermal conductive silicone grease is not the more the better, but the thinner the better under the premise of filling the gap. It is not beneficial to coat more, but will affect the heat conduction efficiency.
2) Keep away from children. If you touch your skin carelessly, wipe it clean, then rinse it with clean water; if you touch your eyes carelessly, rinse it with clean water immediately and go to the hospital for examination.
3) The product should be sealed and stored in a cool, dry and ventilated place (5 ~25). Prevent rain and sun exposure; storage period is 12 months.
4) After opening, the product should be used up as soon as possible. The unused product should be sealed and put in a safe place.
5) There is a layer of oil on the surface of the product after opening, which belongs to the normal qualified product. It should be fully stirred and even before use.
6) This product is non-dangerous and can be stored and transported according to general chemicals.
Packing specification:
This product is packed in plastic cans of 1Kg/tank (12 cans/boxes), 300ml/branch (25 cans/boxes), 50ml/branch (100 cans/boxes).
Warm Tip: Thank you for your trust and support in our company's products. Because of the diversity of practical applications, we can not grasp the application conditions. So users should test before using to confirm whether they meet your requirements and avoid unnecessary waste and loss. Our company does not guarantee any problems arising from the use of our products under specific conditions and does not assume any direct, indirect or accidental liability. If you have any questions, please contact us and we will answer them personally.
- Before: Null
- After: Thermal conductive silicone grease DTT180
Chat